Vaporesso XROS 3 Pod System Kit

  • распродажа
  • Обычная цена 159.00 ₪


The Vaporesso Xros 3 vape kit is a straightforward option that is ideal for new vapers, and its built-in 1000mAh battery can support long vaping sessions. The kit comes complete with a 2ml refillable Xros pod that has a RDTL (Restricted Direct To Lung) coil built in, which eliminates the need for messy coil changes. It also includes a spare MTL (Mouth To Lung) pod in the box, so you can switch up your inhale style.

Features:

RDTL & MTL Vaping

Built-In 1000mAh Battery

16W Max Power Output

Single Button Activation

Pulse Mode

2ml Refillable Pods

Integrated Coils

Thanks to single button activation, there are no menus or screens to contend with, unlock the kit with five clicks and start vaping by either pressing the button or just inhaling on the mouthpiece. Just puff on the mouthpiece of your Xros 3 and it will create a small amount of vapour for an MTL vape with the 1.0 Ohm pod installed. The 0.6 Ohm pod creates a moderate amount of vapour with a tighter draw, allowing for an RDTL vape. Thanks to its AXON chip, it also features Pulse Mode, which intensifies the power and flavour of your vape.

The Xros pod has a top-filling design and you can easily refill it via the port located underneath the mouthpiece; you don’t even have to remove it from your device. It also features leak-resistant technology to cut down on mess. Thanks to its adjustable airflow, you can switch between a tighter or looser draw for a vape that suits you. Plus, the mesh design of the built-in coils heats up your e-liquid faster for better flavour. We recommend pairing either of the included pods with 50% VG e-liquid or higher PG options.

Please note: This kit is compatible with all Xros replacement pods other than the Xros Pro versions, which can only be used with the Xros Pro kit.

Contains:

Vaporesso Xros 3 Device

0.6 Ohm Vaporesso Xros Pod (Pre-Installed)

1.0 Ohm Vaporesso Xros Pod

USB-C Charging Cable

User Manual

VAPORESSO XROS 3 POD KIT

The Vaporesso Xros 3 vape kit is a straightforward option that is ideal for new vapers, and its built-in 1000mAh battery can support long vaping sessions. The kit comes complete with a 2ml refillable Xros pod that has a RDTL (Restricted Direct To Lung) coil built in, which eliminates the need for messy coil changes. It also includes a spare MTL (Mouth To Lung) pod in the box, so you can switch up your inhale style.

Features:

RDTL & MTL Vaping

Built-In 1000mAh Battery

16W Max Power Output

Single Button Activation

Pulse Mode

2ml Refillable Pods

Integrated Coils

Thanks to single button activation, there are no menus or screens to contend with, unlock the kit with five clicks and start vaping by either pressing the button or just inhaling on the mouthpiece. Just puff on the mouthpiece of your Xros 3 and it will create a small amount of vapour for an MTL vape with the 1.0 Ohm pod installed. The 0.6 Ohm pod creates a moderate amount of vapour with a tighter draw, allowing for an RDTL vape. Thanks to its AXON chip, it also features Pulse Mode, which intensifies the power and flavour of your vape.

The Xros pod has a top-filling design and you can easily refill it via the port located underneath the mouthpiece; you don’t even have to remove it from your device. It also features leak-resistant technology to cut down on mess. Thanks to its adjustable airflow, you can switch between a tighter or looser draw for a vape that suits you. Plus, the mesh design of the built-in coils heats up your e-liquid faster for better flavour. We recommend pairing either of the included pods with 50% VG e-liquid or higher PG options.

Please note: This kit is compatible with all Xros replacement pods other than the Xros Pro versions, which can only be used with the Xros Pro kit.

Contains:

Vaporesso Xros 3 Device

0.6 Ohm Vaporesso Xros Pod (Pre-Installed)

1.0 Ohm Vaporesso Xros Pod

USB-C Charging Cable

User Manual

How To Set Up & Use Your Vaporesso XROS 3 Kit

Charge Your XROS 3

Equipped with a long-lasting 1000mAh battery, make sure your kit is fully charged before using it. You can use the included cable and a full charge takes about an hour.

Remove The XROS 3 Mouthpiece

Take the XROS pod out of your kit and then remove the black mouthpiece. You won’t need any tools, just push against the mouthpiece until it clicks off.

Fill The Vaporesso XROS 3 Pod

With the mouthpiece removed, you’ll be able to see the filling port on the pod. Put the nib of your e-liquid bottle into the hole with the red underlay to refill.

Reassemble Your XROS Pod

When it’s refilled, reattach the black mouthpiece to your pod. You can put it in the kit if this feels a little fiddly. Push the mouthpiece back on until you hear a click.

Prime Your XROS Coil

Leave your pod upright for five minutes to “prime” your coil. This gives the coil time to soak up e-liquid and can help it last longer.

 

Unlock And Vape Your Vaporesso XROS 3 Kit

With the pod inserted into your kit you’re ready to go, click the kit’s firing button five times to unlock it. Press it again to vape and lock the kit when you’re done.

 Vaporesso Xros 3 pod range

The Vaporesso Xros 3 vape kit is compatible with the entire Xros range of pods, so it supports both MTL and RDTL vaping.

 Vaporesso Xros 3 smart chip

Thanks to its intelligent AXON chip, the Vaporesso Xros 3 vape kit features Pulse Mode, which intensifies the power and flavour of your vape. *Please note that the estimated 48 hour battery life is based on average use.*

Vaporesso Xros 3 airflow adjustment

The Vaporesso Xros 3 vape kit features an adjustable airflow, so you can switch seamlessly between a tighter or looser draw.

 Vaporesso Xros top filling